Home » Press Fit Inserts
Download PDF of this page  Print this page

General Information on Composite Press Fit Inserts

Composite Press Fit Inserts are used to attach and fasten honeycomb sandwich structures, like an airline floor panel. They are installed from both sides of the panel and require adhesive bonding of plug and sleeve to panel face skins.

The press-fit plug and sleeve style inserts are commonly referred to as "Floor Panel Inserts" because they are widely used in aircraft flooring to fasten the panels to the aircraft structure. However, they can be used anywhere a through hole fastener is desired, where very high load carrying capabilities are considered necessary and insert protrusion out of the panel is not a problem. Each press-fit insert is capable of carrying over a 2,000-lb load, depending on the panel type. Made from a high-tech composite thermoplastic, our inserts are corrosion free, light weight, high strength and low cost.

image missing - press-fit-cad-drawing-2d.jpg image missing - composite-press-fit-insert-closed.jpg  image missing - installing-press-fit-inserts.jpg
2D Specification Drawings CAD / Parts Catalog Installation Procedures & Videos

Composite Press Fit Inserts are used in many Industries

Marketing Master Press Fit Inserts are found everywhere, from the floor panels of an aircraft, to the wall panel on semi-trucks, satellite nose cones, general assemblies and much, much more.

image missing - satalite-press-fit-insert-806.jpg iamge missing - recreational-rv-press-fir-insert-c2.jpg image missing - airplane-press-fit-insert-133.jpg

Marketing Masters' Press Fit are:

For strong, non-corrosive, light weight & less expensive composite clip nuts, and inserts, Contact us OR Request a Quote today.

Styles, Specs & ApprovalsStyles, Specs & Approvals Installing a Press Fit InsertInstalling a Press Fit Insert Parts Catalog / CADParts Catalog / CAD
Part # Cross ReferencePart # Cross Reference